Cortech CREASEMASTER PLATINUM CREASING SYSTEM - Manual (Page 20)

Press the 0.00 key to activate the keypad menu. Enter the length of the page and
press the Enter key to proceed. Press the NEXT key to move to the
next programming screen.
The Strike Perf option can be programmed to come on and off up to 5 times for each
piece of paper. Press the 0.00 key to program the position where you want the
Strike Perf to begin. Once programmed, press the Enter key to return to the programming
screen. Press the 0.00 key to program the distance from the lead edge where the Strike
Page 20