Cortech CREASEMASTER PLATINUM CREASING SYSTEM - Manual (Page 21)

Perf is to turn off. You can repeat this sequence up to 5 times. If no more Strike Perf
locations are needed, press the Next button key and proceed to the next screen.
The Speed and Impression control keys do not effect the operation of the Strike Perf.
Press RunTestPage to see the results of the programming.
Press SkipTestPage if you want to move to the next screen without seeing a test page.
NOTE: The pump must be turned on to feed paper properly. Only look at the first
page as subsequent pages may have fed into the machine but the Run Test Page only
properly runs on the first test page.
Page 21