Printronix PrintCart - Manual (Page 42)

42
Chapter 5 Inverter Replacement
Figure 21. Replacing the Battery
Inverter Replacement
Make sure other causes for power failure are eliminated before replacing the
inverter, (see Table 3, Troubleshooting Problems on page 33). Simple
inspection may prevent unnecessary replacements. The inverter is an integral
part of the power equipment subpallet (PESP) and is not available as a stand
alone unit. The PESP must be replaced as a single unit. The removal process
is described in “Power Equipment Subpallet (PESP) Removal” on page 37.
Figure 22. Inverter Replacement
Battery (-)
Protective
Covers
Battery (+)
Protective Covers
Battery
Clamp Knob
Clamp Plate, Cables,
Fuse, and Disconnects