Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 232)

232
Chapter 4 ADVANCED USER Menu
Auto Elevator
This parameter exists only on printers with the power paper stacker installed.
The power stacker has a sensor which detects paper movement and raises
the stacker as the printed paper stack grows. If the printer has been printing
for three minutes continually and the sensor has not detected any growth in
the paper stack, the stacker raises itself 1/4 inch automatically.
• Enable (factory default). The automatic elevator on the power stacker
operates normally.
• Disable . The stacker does not raise automatically every three minutes
and is entirely dependent on the sensor. Disable is used with extremely
high-quality print jobs that take a long time to print.
Auto Locking
• Disable (factory default). The ENTER key must be locked manually.
• Enable . The printer automatically locks the ENTER key five minutes after
the last front panel key press.
Main File System
The Main File System refers to the flash resident on the P8000 controller.
• Overwrite Files . Allows you to prevent flash files from being overwritten
by disabling the overwrite function.
• View File List . Displays the list of flash files in the main file system. Press
the ENTER key to go into the submenu. Then press the UP or DOWN
keys to view the different file names and size.
• Delete Files . Displays the list of flash files in the main file system. Press
the LEFT or RIGHT keys to select the desired file to delete. Pressing the
ENTER key deletes the file displayed on the control panel.
• Flash Avail . The amount of flash available for the user to save or
download files into the main file system.
• Flash Reclaimable . The amount of flash marked deleted, but cannot be
used until the Optimize&Reboot operation is performed.
• Copy To SD . If the SD card is inserted, the section will allow the user to
copy selected files from the main file system to the SD card (root
directory).
• Optimize&Reboot . Reclaims flash space from deleted flash files within
the main file system. After pressing ENTER, wait for the printer to reboot.
NOTE: When the Optimize&Reboot option is executed, the message,
“Optimizing Flash Files” does not display before printer rebooting
takes place.
• Print File List . Prints a summary of the flash files stored in flash memory
and several statistics on Main File System usage.
IMPORTANT Do not turn the printer off until it has completely rebooted and is either
back online or offline.