Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 360)

360
Appendix E Copying the QCMC “Snapshot” Image to a Second Printer
A QCMC validation check will be performed to ensure the data stored on the
SD is not corrupted. If the test fails the following fault message will display.
This means that the data on the QCMC was not saved properly, and must be
deleted then resaved. Follow the instructions for deleting files, then repeat the
copying process.
If all the checks pass, then the printer will copy the files from the QCMC to the
target printer.
Upon successful completion, the printer will display the following message on
the front panel and reboot into normal operation.
QCMC DATA ERROR
ON SD
Delete & Resave
QCMC Data
DO NOT PWR OFF
Copying QCMC To
Printer...
XX%
Copy Complete