Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 358)

358
Appendix E Saving the Printer’s Configuration to the QCMC
Upon successful completion of saving a flash image to the QCMC, the printer
will display a message indicating the operation is complete. The printer will
then reboot into normal operation.
If there is not enough space on the SD to save the entire flash image, you will
be prompted with the following message.
This is a fatal error and requires user intervention. Cycle power on the printer,
when prompted to save the QCMC select <CANCEL> to skip. The printer will
boot online and allow access to the EMC file menus located under the Printer
Control menu. Delete unnecessary SD files then try the QCMC Save
operation again.
DO NOT PWR OFF
Saving Setup
To QCMC...
XX%
Save Complete
Printer Will Now
Reboot...
NOT ENOUGH
SPACE ON SD
Delete SD File