Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 356)

356
Appendix E Installing the QCMC
Installing the QCMC
CAUTION You must power off the printer before you install or remove the QCMC,
or you may damage the QCMC and the printer. If you remove the QCMC
after powering on the printer with the QCMC installed, the fault message
“SD REMOVED Reboot Printer” will display. You cannot clear this
message by reinserting the QCMC. You must cycle power.
1. Set the printer power switch to O (Off).
2. Insert the SD card into the QCMC slot on the back of the printer.
Figure 62. QCMC Slot on Back of Cabinet Model
Figure 63. QCMC Slot on Back of Pedestal
1 2 3 4 5
6 7 8 9
QCMC Slot
1 2 3 4 5
6 7 8 9
184951a
QCMC Slot