Velleman ABJ10T - Manual (Page 3)

ABJxT Rev. 02
07/06/2010 © Velleman ® nv 3
Only use the jack on vehicles of which the lift points on frame and/or
underbody are compatible with the saddle of the jack. Check the user
manual that came with the vehicle to determine location and type of
lift points.
Incompatibility may cause structural damage to vehicle and/or jack.
This device is for lifting purposes only. Once the vehicle is lifted to
the desired height it must be supported by a pair of jack stands with
the appropriate rating.
Never work under or near a load that is only supported by this
device.
Do not use the jack for continuous support e.g. to level a trailer,
camper, building structure… or to move a vehicle.
Do not attempt to move the vehicle and never enter or climb on the
vehicle while it is supported by the jack.
Always chock wheels that are in contact with the floor in both
directions.
Make sure the area under the vehicle is clear before lowering.
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered by
the warranty.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this
manual.
• Familiarise yourself with the functions of the device before actually using it.
• Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
• Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
A saddle F overload valve (do not adjust!)
B pump body G oil filler plug
C handle socket H
D release valve I
E* carrying handle J
*: not on every model
5. Use
Always comply with the safety instructions as described in §2.