Dvm805 – digital sound level meter – Velleman DVM805 User Manual

Page 3

Advertising
background image

DVM805

VELLEMAN

- 3 -

DVM805 – DIGITAL SOUND LEVEL METER

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.

This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the DVM805! Use it only as specified in this manual to avoid erroneous performance.

2. Specifications


Max. altitude

2000 m

Applicable standard

IEC651 type 2, ANSI S1.4 type 2

Frequency range

31.5Hz ~ 8 KHz

Measuring level range

35 ~ 130dB (Lo: 35-100 dB; Hi: 65-130dB)

Frequency weighting

A/C

Microphone

½" electret condenser microphone

Calibration

electrical calibration with the internal oscillator (1 kHz sine wave)

Display

3 ½ digit LCD

Resolution

0.1dB

Time weighting

fast (125ms) or slow (1s)

Accuracy

± 1.5dB (under reference conditions)

Overrange indication

“OVER” is displayed

Auto power-off

after 15 minutes of inactivity

Power supply

one 9V-battery (NEDA 1604 or 6F22)

Battery life

± 50hrs (alkaline battery)

Low-Battery indication

“BAT” is displayed

Operating temperature

0~40°C (32~104°F) with 10~90% RH

Storage temperature

-10 to +60°C (14 to 140°F) with 10~75% RH

Dimensions (H x W x D)

210 x 55 x 32 mm

Weight

230g (incl. battery)


3. Front Panel Description


1. Wind cap: in wind speeds of >10m/s, put this cap over the microphone
2. ½" electret condenser microphone
3. Display: 3 ½-digit LCD with MAX HOLD, DATA HOLD, Lo, Hi, A, C, BAT, S, F, dB, and

OVER indication

4. POWER ON/OFF button
5. Backlight button
6. A/C weighting button (A = general; C = low frequencies)
7. F/S button: to select slow or fast response
8. Low/Hi button: to select the higher or lower measuring ranges
9. MAX/HOLD button:
10. Battery cover for 9V battery at the back of the meter

Advertising