Dvm805 – digitale geluidsniveaumeter – Velleman DVM805 User Manual

Page 4

Advertising
background image

DVM805

VELLEMAN

- 4 -

4. Operating Instructions


1. Place the function switch in the A or C position.
2. Hold the meter horizontally and direct the microphone towards the sound source to be measured.
3. Press the Lo/Hi button to select Lo & dB or Hi & dB.
4. Press the S/F button to select slow & dB or fast & dB
5. Both the A & C weighting curves have a frequency range between 30Hz and 10 KHz.
6. The fast response is ideal to measure short bursts of sound and peak values.
7. The sound level is displayed

Note: strong winds (> 10m/sec.) can influence your measurements. Use the included windscreen when this happens.

5. Battery Replacement


The “BAT” indication appears on the LCD when the battery needs to be replaced. Open the battery case, remove the
old battery and insert the new one.

The contents of this manual can be subject to change without prior notification.

DVM805 – DIGITALE GELUIDSNIVEAUMETER

1. Inleiding

Aan alle ingezetenen van de Europese Unie

Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen,
dit toestel schade kan toebrengen aan het milieu.
Gooi dit toestel (en eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een
gespecialiseerd bedrijf terechtkomen voor recyclage.

U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt brengen.
Respecteer de plaatselijke milieuwetgeving.

Heeft u vragen, contacteer dan de plaatselijke autoriteiten inzake verwijdering.

Dank u voor uw aankoop! Gebruik het toestel uitsluitend zoals beschreven in deze handleiding om een verkeerd
gebruik te vermijden.

2. Specificaties

Max. hoogte

2000 m

Toegepaste standaard

IEC651 type 2, ANSI S1.4 type 2

Frequentiebereik

31.5Hz ~ 8 KHz

Meetbereik

35 ~ 130dB (Lo: 35-100 dB; Hi: 65-130dB)

Frequentiebeweging

A/C

Microfoon

ingebouwde ½" elektreet-condensatormicrofoon

Kalibratie

elektrische kalibratie met interne oscillator (1 kHz sinusgolf)

Display

3 ½ digits LCD

Resolutie

0.1dB

Respons

snel (125 ms) of traag (1 s)

Nauwkeurigheid

± 1.5dB (onder aangeduide omstandigheden)

Aanduiding oversturing

“OVER” verschijnt op display

Automatische uitschakeling

na 15 minuten inactiviteit

Voeding

9V-batterij (NEDA 1604 of 6F22)

Vermogen batterij

± 50 uur (alkalinebatterij)

Advertising