Velleman LCR40 - Manual (Page 12)

Atlas LCR User Guide January 2009 – Rev 4
Page 12
Taking care of your Atlas LCR
Battery Replacement
The Atlas LCR requires no special maintenance
although the battery should be replaced every 12
months to prevent leak damage.
If this message is displayed, the battery
should be replaced as soon as possible to
prevent malfunction or leak damage.
Although the unit may continue to operate following a low battery warning,
measurements may be adversely affected.
New batteries can be purchased from many retailers and directly from Peak
Electronic Design Ltd or an authorised agent.
Battery types:
Suitable battery types include 23A, V23A, GP23A, MN21 or a
good quality 12V alkaline equivalent as used in many test instruments and
automotive remote key fobs.
Battery access:
To replace the battery, unscrew the three screws to remove the
rear panel. Remove the old battery and insert a new one, taking care to
observe the correct polarity. Carefully replace the rear panel, do not over-
tighten the screws.
Peak Safe Battery Disposal Scheme
: Please return your old analyser battery
to Peak Electronic Design Ltd for safe and environmentally responsible
disposal.
* Low Battery * * Low Battery * * Low Battery * * Low Battery *