GLOBALSAT TR-203A User Manual
Page 22
21
connect to server for
one time.
E6
Enable/disable TR-203
to send “OK” to server
after GPRS connection
is re-built.
1/0
0=disable
1=enable
Available when E5 is not 0
RD
Interval for switching
from validation to
static state
if no motion detected
u16, in
seconds
0=Interval is the same with R1
RE
Traveled distance to
be judged as keep in
moving state
u16,
Unit: meter
RF
Interval for switching
from moving to static
state
if no motion detected
u16, in
seconds
0=Interval is the same with R1
RG
Check GPS off time
setting (C7, C8, C9, CA
1/0
0=disable
1=enable
RH
GPS always on in
moving state
1/0
0=disable
1=enable
W0
Start time
u32, in
seconds
0 ~ 86400
W1
End time
u32, in
seconds
0 ~ 86400
W2
Report interval
u16, in
seconds
1 ~ 65535
W3
Weekday mask
u8, xx(hex
digits)
00 ~ 7f
Weekday is in hex-digit format
which specifies applicable day in
a week, where bit 0 represents
Sunday, bit1 represents Monday,
etc.
Ti
m
e
r
T
imer 0
W4
Report Media
Media type
bit0=SMS
bit1=TCP
bit2=UDP