GLOBALSAT TR-203A - Manual (Page 58)

57
7.2 Sleeping Mode
In order to save the power of TR-203, you could make TR-203 enter sleeping
mode. When TR-203 is under sleeping mode, its GSM module and GPS
module will be turned off, the motion sensor will be turned on. TR-203 will
also regularly send report to server according to the report Interval in Alert
State. When TR-203 senses vibration, it will send alarm report to server
according to the report Interval in Alarm State.
You could define the content of report and the report interval of sleeping
mode.
The behavior is as following:
T
h
e
n
Received command and then entering sleeping mode (GPS/GSM will be turn off).
o
When TR-203 is static, it will send “sleeping alert report” according to “Alert
interval time”.
p
When TR-203 detects motion, it will enter sleeping alarm state (GPS/GSM wake up)
and send “sleeping alarm” report.
q
If TR-203 is not moved, it will return to the sleeping alert state.
r
Re-start timer for sleeping alert interval.
s
Sleeping alert report.
Time
n o
p
q
r
s
U0 (Alert interval)
U1 (Alarm interval)
(Alert Report) GPS/GSM be turn on
(Alarm Report) GPS/GSM be turn on
GPS/GSM always be turn off, except alert and alarm report time
Alarm period (GSM always be turn on)