Rough Country 276P - Manual (Page 8)

39. Bolt the second differential bracket to the upper axle mount on the passenger side using the 9/16” x4” bolts, washers
and nuts provided in 1274bag3. Torque to 95 ft/lbs See Photo 28.
40. Using a floor jack hang the differential back into the stock frame mount using the stock hardware. Torque to 95 ft/lbs.
See Photo 29 shows the driver side.
41. Passenger Side differential bracket shown in Photo 30.
42. Using the stock bolts, secure the lower differential mounts to the rear cross member. See Photo 31& 32. Torque to
95 ft/lbs.
43. Using the upper control arm drop as a guide and using a 17/32” drill bit; drill the 2 front holes in the upper control
arm bracket. See Photo 33.
Driver s Side Shown
Pass Side Shown
Photo 28 Photo 29
Photo 30 Photo 31
Photo 32 Photo 33