Banks Power Ford Trucks: (Diesel ’08 - 10 6.4L Power Stroke) Tuner- Six-Gun Diesel Tuner & SpeedBrake, For use with Banks iQ '08-10 Compatible with PowerPDA - Manual (Page 26)

26
96827 v.6.0
Section 6
TROUBLESHOOTING
If a Tuner has been previously
installed, verify that the Tuner has
the latest version firmware. Check
your version to the current version
available on the Banks website.
SpeedBrake may not function
properly if Tuner/Brake firmware is
not up to the current version.
For PowerPDA, use PowerPDA
manual for TroubleShooting
instructions.
Six-Gun & Brake Troubleshooting
Using The Banks iQ
Check the Banks iQ’s Status indicator
for the “OK” icon on the upper left
corner of the iQ screen. Any Tuner fault
will be indicated by the “Banks Engine”
icon (see Figure 21) and its cause can
be investigated by running a ‘Tuner
Diagnostic’ from the Diagnostic menu.
1.
In the Environment select menu
press on the ‘Diagnostics’ button. See
Figure 22.
2.
In the Diagnostics menu press on
the ‘Tuner Diagnostics’ button to run a
tuner diagnostics. See Figure 23.
3.
The ‘Self Diagnostic’ screen displays
a log of diagnostic events related to
the Power Tuner. The ‘Logged Events’
list takes a moment to update each
time this screen is opened. Once
the list is updated, the most current
event will appear at the bottom of
the list. Each event has an associated
timestamp and description, which will
be displayed below the list when that
event is highlighted. Each key cycle
of the vehicle produces a minimum
of two logged events. See Figure 24.
Table 1 lists the common diagnostic
codes and the suggested course of
action for each.
4.
Use the arrow buttons to scroll
through the recorded events
5.
Touch the Banks iQ icon on the
lower left of the screen to return to the
environment screen or the return icon
to return to the Diagnostics menu.
6.
A pop-up “Log-File” screen will
appear asking you if you want to erase
the contents of the log. Press ‘No’ to
keep the contents on Log-file or ‘Yes’,
to erase the Log-files.
Figure 21
Banks Engine
Icon