Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "second generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 10)

10
96833 v.3.0
For Banks Power Tuner and/or
SpeedBrake Users
The Banks iQ is a versatile touch-screen
interface between your Banks Power
Tuner and/or SpeedBrake and your
vehicle. With the touch of the screen,
you can change power levels or brake
settings on-the-fly. These are just two
of the numerous parameters Banks iQ
lets you adjust while connected to a
Banks Power Tuner and/or SpeedBrake.
It displays data from any five engine
gauges you select.
NOTE: Banks iQ will only display Banks
Power Tuner, SpeedBrake, or other
Banks software functions if you have
purchased them. Remember, you can
upgrade your Banks iQ as new software
is developed and learn more about
other Banks iQ applications anytime at
www.bankspower.com/banksiq. To
purchase, call us toll-free at 1-800-635-
4565.
Receive Update Notices
Banks iQ is constantly evolving. We invite
you to register at www.bankspower.
com/banksiq to receive important
emails regarding updates and upgrades
for your Banks iQ device.
For more detail instruction to update
your Banks iQ please go to banks
website at www.bankspower.com/
iqupdate
-END, SEcTION 2-
1.
Locate the Window Mount Assembly
in your kit.
2.
Assemble the Banks iQ docking
station to the Universal mount by
inserting and sliding the Universal
mount tab into the docking station
groove. Hand tighten the nut behind
the docking station to hold the docking
station in place.
3.
Attach the window mount to your
Banks iQ. See Figure 3. Align and place
the two (2) lower tabs on the window
mount to the corresponding slots on the
bottom of the iQ first then snap the top
of the iQ into place.
NOTE: Due to the snug fit, use caution
when installing the Banks iQ into the
window mount.
4.
Find a suitable place on the
windshield for ease of access and
viewing of Banks iQ. Use location
shown in Figure 4 as a reference for
mounting Banks iQ in your vehicle.
Loosen the knob and move the swivel
suction plate to achieve desired viewing
angle of the Banks iQ screen. Do a test
fit and note the angle necessary to
achieve the correct viewing angle.
5.
Make sure the suction cup and the
mounting area on the windshield are
clean and dry. With the suction lever
in the up position, ensure the suction
cup is flat against the windshield, and
then push the suction lever down to
secure in place.
Section 3
MOUNTING aND CONNECTING THE BaNKS iQ