Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "second generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 39)

96833 v.3.0
39
Figure 41
2.
Adjust the ‘Display Sleep’ time by
pressing the left or right arrows.
NOTE: If the display turns off, turn it back
on by pressing once anywhere on the
screen.
3.
Adjust the ‘iQ Sleep’ time by pressing
the ‘Left’ or ‘Right’ arrows. iQ sleep will
begin to count down after the display has
entered into ‘Display Sleep’ mode.
NOTE: ‘iQ Sleep’ will occur after ‘Display
Sleep’ has been activated. To manually
enter or exit ‘Sleep’ mode, press the
MENU button on top of the device.
4.
Press the ‘Banks iQ’ icon on the
lower left hand corner to return to the
Environment screen. Press the ‘Return‘
icon to go back to the ‘Adjustments’
menu.
Master Volume
1.
To change the Volume Level for the
iQ, press the ‘Volume’ button in the
‘Adjustments’ menu.
2.
To adjust the volume level, press the
plus (+) or minus (-) button to increase or
decrease the volume level. See Figure
42.
3.
Press the ‘Banks iQ’ icon on the
lower left hand corner to return to the
Environment screen. Press the ‘Return’
icon to go back to the ‘Adjustments’
menu.
Figure 42