Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "second generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 17)

96833 v.3.0
17
‘Wrench’ icon that will direct you to
the ‘Adjustments’ menu. For more
description of the ‘Adjustments’ menu,
please see Section 17 .
For more information regarding the
Banks Power Tuner, please refer to
Section 6 .
The Safety and combo Power & Safety
screens have additional buttons that
allow you to choose your Braking
Mode. For more information, please
refer to Section 7 & 8 .
The combo Power & Safety screen
allows you to switch quickly between
Power and Safety environments. For
more information, please refer to
Section 8 .
-END, SEcTION 5-
Your Banks Power Tuner features
selectable power levels are 1 thru 6.
Level 1 is the vehicle’s stock power.
Level 2 is the EconoMind® setting,
specifically designed to improve fuel
economy. Level 3 thru 6 produce
incremental power increases along
with EconoMind features. The Speed-
Loader level offers the maximum power
available and will appear as ‘SL’ when
enabled. The selection of a power level
can be done on-the-fly while driving.
To increase power level, press the ‘Up’
arrow. To decrease the power level,
press the ‘Down’ arrow on the right side
of the screen. See Figure 12. Power
level is displayed in-between the arrows.
On the lower left hand corner of the
screen are the ‘Banks iQ Home’ icon,
which will direct you back to the
‘Environment Select’ menu, and the
‘Wrench’ icon that will direct you to
the ‘Adjustments’ menu. For more
description of the ‘Adjustments’ menu,
please see Section 17 .
to prevent damage to the factory
transmission, Banks recommends
that automatic transmission vehicles
do not exceed level 4 with the Banks
iQ while the vehicle is experiencing
load (towing, climbing a steep grade,
carrying a load, etc.).
Section 6
POWER ENVIRONMENT
Figure 12 Power Screen