Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ "second generation Ford (03-10), Chevy (01-10), Dodge (03-07)" - Manual (Page 33)

96833 v.3.0
33
Gauges
There are five (5) gauges displayed
in the Economy Environment. See
Figure 31. The three (3) to the left
of the screen can be changed to
display the data from a list of available
parameters. The two (2) on the right,
Instant MPG and Average MPG, can be
changed only to increase or decrease
the scale display. Refer to ‘Gauge
Placement’ in selection 15 to change
the Gauges displayed.
Trip
The Trip feature will keep track of your
vehicles Average Speed, Trip Distance,
Trip Time, Engine On Time, cost per
Trip, Fuel Used, MPH, Instant MPG, &
Average MPG. You can switch between
two (2) Trip recordings, ‘Trip A’ and
‘Trip B’, by pressing the letter on the
lower right corner of the Economy
Environment screen. See Figure 31.
You can view all this information by
pressing on the wrench icon in the
lower left corner of your screen. In
the ‘Options’ menu press on the Trip
information you wish to view. Once
you have viewed the information, press
the return icon to return to the Options
menu or press the iQ icon to return to
the Economy Environment.
Reset trip Information
The Trip information data can be reset
by pressing and holding the letter
of the trip you wish to clear for 5
seconds on the lower right corner of
the Economy Environment screen. You
may also reset the trip information by
going to the trip data screen for each
screen and press the ‘Reset’ button on
the lower right corner. See Figure 32.
Trip A has the option to reset
automatically. All the data captured
will be reset to zero after the engine
has been off for more than two (2)
hours. To enable this option press on
the wrench icon in the lower left hand
side of the screen of the Economy
Environment screen. In the ‘Options’
menu press on the ‘Trip A’ tab. In the
lower part of the Trip A screen press
‘Auto’ to have the iQ automatically
reset the trip information or press
‘Manual’ to manually reset the
information. See Figure 32. Press the
‘Return’ icon to return to the ‘Options’
menu or press the ‘iQ’ icon to return to
the Economy Environment.
-END, SEcTION 13-