Banks Power Chevy_GMC Trucks: Duramax LB7 (Diesel ’01 - 04 6.6L) Power Systems- PowerPack & Stinger Systems w_ EconoMind (LB7 & LLY) '01-05 (iQ) Compatible with Optional Banks iQ User Manual
Page 23
Advertising
96814 v.2.0
23
INSTALLATIoN oF WIRING
HARNESS, CoNNECTIoNS AND
EconoMind DIESEL TuNER
1.
From the engine compartment,
locate the rubber grommet high
on the driver’s side of the vehicle
firewall. The grommet is about 3”
in diameter. Make a 1” x 1” cross-
shaped incision in the grommet (see
Figure 36).
2.
From the engine compartment,
feed the grey three-connector cable
through the incision made in the
firewall grommet and into the cab.
From inside the cab, remove the
lower dash panel under the steering
column to allow access to these
three connectors.
Section 5
BANkS ECoNoMIND DIESEL TuNER INSTALLATIoN
Figure 35
General Assembly
Banks EconoMind Diesel Tuner
Figure 36
Advertising