Banks Power Chevy_GMC Trucks: Duramax LLY-LBZ (Diesel ’06 - 07 6.6L) Tuner- Six-Gun Diesel Tuner '06-07 (iQ) Compatible with Optional Banks iQ & Speed-Loader - Manual (Page 11)

96817 v.3.0
11
If not installing the optional Banks iQ,
skip to Section 3.
WARNING: Below 32
o F (0 o C) or
above 140 o F (60 o C), the Banks iQ
may be susceptible to damage as a
result of extended direct exposure
to sunlight, heat, or extreme
cold. It is highly recommended
that the Banks iQ be removed
from its mounting location if the
vehicle will be subjected to these
conditions for an extended period
of time. Gale Banks Engineering
is not responsible for damage to
Banks iQ resulting from exposure
conditions..
CAUTION: Do not use force
when working on plastic parts.
Permanent damage to the part
might result.
1.
Locate the Window Mount
Assembly in your kit.
2.
Assemble the Banks iQ docking
station to the Universal mount by
inserting and sliding the Universal
mount tab into the docking station
groove. Hand tighten the nut behind
the docking station to hold the docking
station in place.
3.
Attach the window mount to your
Banks iQ. See Figure 7. Align and place
the two (2) lower tabs on the window
mount to the corresponding slots on
the bottom of Banks iQ first then snap
the top of Banks iQ into place.
Note: there may be a snug fit when
installing the Banks iQ into the window
mount. take care not to force this
process.
Section 2
MOUNTING AND CONNECTING THE BANkS iQ
Figure 7 Attaching Banks iQ to window mount