Banks Power Ford Trucks: (Diesel ’99 - 03 7.3L Power Stroke) Power Systems- Big Hoss Bundles '99-03 F-250 & F-350 User Manual
Page 6
Advertising
long bolt. See Figure
4
. The
M10x1.5x20mm bolt is used on the
cylinder-head side of the bracket. The
3
⁄
8
-16x
3
⁄
4
” bolt is used on the Power
Elbow side of the bracket.
24.
Reinstall the air inlet hose to the
turbocharger compressor air inlet.
Reinstall the MAP sensor.
25.
clamp the upper portion of
the supplied turbine outlet pipe
onto the outlet of the
Power Elbow
assembly using the original turbine
outlet V-band clamp (on Bundles
47582-47587 use supplied V-band in
place of original). Locate the build
Figure 4
Figure 6
6 |
9 6 5 7 7 v . 2 . 0
Advertising