Banks Power Chevy_GMC Trucks: Duramax LLY-LBZ (Diesel ’06 - 07 6.6L) Power Systems- PowerPack & Stinger Systems w Economind (LLY & LBZ) '06-07 (PDA) Compatible w_ Optional PowerPDA - Manual (Page 30)

30
96506 v.8.0
MoUNTING THE BaNkS
ECoNoMIND DIESEL TUNEr
9.
The EconoMind is to be installed
under the hood on the outside of
the fuse box, with the wire harness
facing towards the rear of the vehicle
(see Figure 5.4). Make sure the
outside of the fuse box is free of oil,
grease and dirt.
10.
With the Banks EconoMind
Diesel Tuner positioned next to the
fuse box, peel the protective backing
from the hook and loop interlocking
fasteners attached to the Banks
EconoMind Diesel Tuner. Position the
bottom edge of the Banks EconoMind
Diesel Tuner approximately a half
inch above the main wiring harness
exiting the fuse box, then press the
adhesive onto the outside of the
fuse box. Apply light pressure to
the Banks EconoMind Diesel Tuner
by hand for 60- seconds to create
a strong bond between the fuse
box and hook & loop interlocking
fasteners. Using the supplied cable
ties, secure the wire harness away
from any heat sources or moving
components.
-END, SEcTION 5-
Figure 5.4 Driver’s side of engine compartment
Figure 5.2
Figure 5.3