Banks Power Chevy_GMC Trucks: Duramax LLY-LBZ (Diesel ’06 - 07 6.6L) Power Systems- PowerPack & Stinger Systems w Economind (LLY & LBZ) '06-07 (PDA) Compatible w_ Optional PowerPDA - Manual (Page 36)

36
96506 v.8.0
NOTE: Please refer to the Banks
PowerPDA Software & Installation
Kit, Owners Manual for software
installation and operation instruction
before beginning Section 9,
Automatic Transmission Learning.
The 6.6L GM Duramax Trucks
equipped with the Allison 1000
5-speed automatic overdrive
transmission use adaptive shift
control logic. This will require
the transmission to adapt to the
additional power created by the
Banks Power products before it will
shift properly. Failure to follow the
sequence can result in damage to the
transmission. Perform the following
sequence at a location where it is
safe to accelerate without exceeding
the posted speed limit.
1.
With the power selector on level
one, start the truck and allow the
engine to reach normal operating
temperature.
2.
Switch to power level two.
3.
Drive vehicle in power level two
for 5 to 10 miles ensuring a complete
shift cycle though each gear. (The
transmission shift adaptation learning
process requires 15 to 30 complete
shift cycles to learn new shift
program.)
4.
Repeat step 3 for each power
level.
WarNING: Take particular care
not to do wide open runs in
5th gear when in automatic
transmission Learning Mode. The
allison 1000 5-speed automatic
transmission will continually
adapt to the power output of
the engine to optimize shift
quality. The transmission will
quickly adapt to the power
setting if the driving cycle
includes regular gear changes
at high loads. The transmission
learning procedure will need to
be repeated when switching back
to the higher power settings once
the transmission adapts to the
lower power settings. It will be
apparent when the transmission
adapts to the lower settings
by monitoring the feel of the
gearshift. Gear changes will be
noticeably harder when initially
switching from a higher to lower
power setting. This will soften as
the transmission adapts to the
new setting.
-END, SEcTION 9-
Section 9
aUToMaTIC TraNSMISSIoN LEarNING
Section 10
UPDaTING YoUr BaNkS PoWErPDa SoFTWarE & BaNkS ECoNoMIND DIESEL TUNEr
The Banks PowerPDA is designed
such that new software updates
can be easily installed. check the
BanksPower web site at <http://
www.bankspower.com/downloads>
for the latest version of the Banks
PowerPDA software. Once you have
determined that your Banks Pow-
erPDA should be updated, follow
the instructions on the page for the
appropriate software update.
The Banks EconoMind Diesel Tuner
is designed such that new firmware
updates can be easily installed.
check the BanksPower web site
at <http://www.bankspower.com/
downloads> for the latest version of
the Banks EconoMind Diesel Tuner
firmware. Once you have determined
that your Banks EconoMind Diesel
Tuner should be updated, follow the
instructions on the page for the ap-
propriate firmware update.
END, SEcTION 10-