Banks Power Ford Trucks: (Diesel ’99 - 03 7.3L Power Stroke) Power Systems- Stinger, Stinger-Plus & PowerPack systems '19991_2-2003 F250_F350 Trucks & Excursion (non-cat) User Manual

Page 20

Advertising
background image

88.

Observe operation of the

boost and pyrometer gauges while

driving under varying conditions.

Turbocharger boost pressure

fluctuates as a function of load and

rpm. The engine produces lower

boost while cruising at light throttle.

Maximum boost occurs while

climbing hills and heavily loaded

during acceleration. Note the boost

level during hard acceleration with

a given load. If future performance

declines, the maximum boost

pressure figures may be compared

to see if boost has decreased.

Lower boost can be caused by turbo

ducting leaks, a malfunctioning fuel

injection system, or a dirty air filter.

Maximum boost pressure settings

for the Power Stroke turbo diesel

vary considerably, due to manual

or automatic transmission options,

vehicle year and model, and altitude.

Boost readings may vary between 18

and 21 psi.

89.

Use your pyrometer gauge to

monitor exhaust gas temperature

(EGT) in the engine. At idle, EGT will

be very low, perhaps only 300°F.

As the engine accelerates and is

under load, the EGT rises. The safe

maximum for the EGT is 1050°F.

The highest EGT occurs under

maximum load at full throttle, such

as climbing a steep grade with a

heavily laden vehicle. If the vehicle

reaches maximum EGT during these

conditions, downshift to reduce load,

or back off the throttle. CAUTION:

Exceeding 1100°F can cause engine

damage.
We recommend that engine oil temp

not exceed 250°F. Optimum oil

temperature is around 230°F.

–END, SECTION 8–

Section 8

CHECKING ENGINE PERFORMANCE

20

96334 v.5.0

Advertising