Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Speed Control- SpeedBrake '07-08 (PDA) For use with PowerPDA - Manual (Page 13)

97229 v.8.0
13
such as Acetone, Mineral Spirits,
Denatured Alcohol or Lacquer thinner.
Read and follow the manufactures
operation instruction for non-oil based
solvent cleanser.
If vehicle is equipped with a Banks
tuner, the Banks SpeedBrake can be
installed next to the Banks tuner.
21.
Insert the SpeedBrake 20-pin
female connector on the wire harness
to the SpeedBrake Module. Using the
supplied cable ties, secure the wire
harness away from any heat sources
(i.e. Driver side exhaust manifold) or
moving components.
-END, SEcTION 1-
Figure 10 Placement of the SpeedBrake Module