Banks Power Chevy_GMC Trucks: Gas ’99 - 14 4.3,4.8,5.3,6.0,6.2,8.1 Intake- Ram-Air Intake System '99-08 Chevy-GMC (4.8L, 5.3L & 6.0L) Pickups & SUVs - Manual (Page 11)

15.
Locate the Banks Ram-Air Intake
tube and supplied throttle body seal
gasket with hose clamp. Slide rubber
grommet and hose clamp over the
outlet of the intake tube.
16.
Install the Banks Ram-Air Intake
tube onto the throttle body. Do not
tighten the clamp at this time.
17.
for truck models with No
PCV hose,
locate the supplied PCV plug and
install over the PCV outlet in the
intake tube. Secure the plug using the
supplied spring band clamp.
for all other truck models with a
PCV hose connection,
Locate the supplied PCV hose and
spring band clamp. Slide the spring
band clamp over the PCV hose and
install the PCV hose over the PCV
outlet on the Banks Intake tube. Slide
the clamp to secure the hose to the
PCV outlet on the Banks Intake Tube.
Install the outlet of the Banks PCV
hose into the Valve Cover. See
figure 8.
18.
Align the intake tube to the outlet
of the MAF sensor outlet.
See figure 9.
19.
Install, but do not tighten, the
Banks bellows hose and hose clamp
onto the MAF sensor outlet and intake
tube inlet. Make sure that the bellow
hose is inserted properly into the MAF
sensor outlet and the Banks intake
tube and tighten the hose clamps.
Figure 8
96882 v.3.0
11