Banks Power Chevy_GMC Trucks: Gas ’99 - 14 4.3,4.8,5.3,6.0,6.2,8.1 Intake- Ram-Air Intake System '99-08 Chevy-GMC (4.8L, 5.3L & 6.0L) Pickups & SUVs User Manual
Page 9
6.
From the stock air box, remove the
stock air Filter Minder. Make sure to
remove the stock air filter Minder’s
rubber grommet as well.
7.
Next, remove the stock air box
tray. Remove the bolts accessible from
the top of the engine compartment
as shown then remove the stock
air box tray. See figure 4 . Keep
the previously removed bolts for
reassembly later in the installation
process.
8.
Locate your Banks Ram-Air Filter
Housing from you kit. Align the Banks
Ram-Air Filter Housing to fit parallel
to fender edge. Install and tighten the
previously removed bolts to secure the
Banks Ram-Air Filter Housing.
Note: It may be necessary to adjust
the radiator to overflow bottle hose to
provide clearance for the Banks Filter
Cover Housing. Adjust any other wires
or hose as needed.
9.
Locate the Banks Ram-Air Filter
Housing cover.
for vehicle models without a
Stock filter Minder,
Install the supplied Filter Minder Plug
over the filter minder opening on the
Banks Ram-Air cover.
for all truck models with a stock
filter Minder,
Install the stock air filter Minder’s
rubber grommet into the Banks Ram-Air
Filter Housing Cover. Once the rubber
grommet is installed flush into the Banks
Ram-Air Cover, then the filter Minder can
be inserted into the rubber grommet.
Make sure the air filter Minder is
installed flush to the rubber grommet.
10.
Locate the Banks Ram-Air Filter
Element and filter hose clamp. Install
the filter hose clamp on the filter.
Figure 6
96882 v.3.0
9