Banks Power Chevy_GMC Trucks: Gas ’99 - 14 4.3,4.8,5.3,6.0,6.2,8.1 Intake- Ram-Air Intake System '99-08 Chevy-GMC (4.8L, 5.3L & 6.0L) Pickups & SUVs - Manual (Page 12)

20.
Re-attach the MAF connector to
the MAF sensor.
21.
Affix the “Do Not Discard” sticker
on or near the filter case (included
with every Banks replacement
element). Make sure you put the
sticker in a highly visible place to alert
your mechanic not to discard.
25.
You system includes two (2) Banks
Power decals designed to complement
the Chevy emblems on the vehicles front
doors.
22.
Re-install the engine cover with
the stock fastener. Make sure to go
over all hose clamps for tightness and
connectors for a sure fit. Make sure
that the intake tube is not touching
any engine components. Re-connect
battery grounds. You have successfully
completed the installation of the Banks
Ram-Air Intake system.
Figure 9
12
96882 v.3.0