Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Speed Control- SpeedBrake '07-10 (iQ) For use with Banks iQ Only - Manual (Page 12)

12
97240 v.6.0
If vehicle is equipped with a Banks
tuner, the Banks SpeedBrake can be
installed next to the Banks tuner.
20.
Insert the SpeedBrake 20-pin
female connector on the wire harness
to the SpeedBrake Module. Using the
supplied cable ties, secure the wire
harness away from any heat sources
(i.e. Driver side exhaust manifold) or
moving components.
-END, SECTION 1-
Figure 10 Placement of the SpeedBrake Module