Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Speed Control- SpeedBrake '07-10 (iQ) For use with Banks iQ Only - Manual (Page 13)

97240 v.6.0
13
WaRNING: Below 32 o f (0 o C) or
above 140 o f (60 o C), the Banks iQ
may be susceptible to damage
as a result of extended exposure
to sunlight, heat or extreme
cold. It is highly recommended
that the Banks iQ be removed
from its mounting location if the
vehicle will be subjected to high
concentrations of sunlight, heat
or cold for an extended period of
time. Gale Banks Engineering is not
responsible for damage to Banks iQ
resulting from exposure conditions .
CaUTIoN: Do not use force
when working on plastic parts.
Permanent damage to the part
might result.
1.
Locate the Window Mount Assembly
in your kit.
2.
Assemble the Banks iQ docking
station to the Universal mount by
inserting and sliding the Universal mount
tab into the docking station groove.
Hand tighten the nut behind the docking
station to hold the docking station in
place.
3.
Attach the window mount to your
Banks iQ. See figure 11. Align and place
the two (2) lower tabs on the window
mount to the corresponding slots on the
bottom of Banks iQ first then snap the
top of Banks iQ into place.
Section 2
MoUNTING aND CoNNECTING THE BaNkS iQ
Figure 11 Attaching Banks iQ to window mount