Grain Systems PNEG-1876 - Manual (Page 42)

42 PNEG-1876 30' Tower Dryer Fan Style Catwalk Assembly
6. 30' Offset and Roof Hatch Platform Installation Instructions
Installing Z-Clips (GT1-2036)
1. Bolt Z-clip (GT1-2036) to vertical channel (GT1-0001). The Z-clip can be installed on each vertical
channel as the wall sheets are installed using 3/8"-16 x 1" YDP grade 8 or grade 8.2 bolts (S-7927)
and 3/8"-16 ZN grade 5 nuts (S-968).
(See Figure 6A, Figure 6B below, Figure 6C and Figure 6D on
Page 43.)
Figure 6A Offset Z-Clip Installation
Figure 6B Offset Z-Clip Installation