Grain Systems PNEG-1876 - Manual (Page 45)

6. 30' Offset and Roof Hatch Platform Installation Instructions
PNEG-1876 30' Tower Dryer Fan Style Catwalk Assembly 45
Installing Catwalk Support Clip (GT1-2040-BS)
1. Install the catwalk support clips (GT1-2040-BS) to the vertical channel (GT1-0001). Support clip can
be installed on each vertical channel as the wall sheets are installed using 3/8"-16 x 1" YDP grade 8
or grade 8.2 bolts (S-7927) and 3/8"-16 ZN grade 5 nuts (S-968).
(See Figure 6G below and
Figure 6I on Page 46.)
2. The minimum distance between the Z-clip and support clip is 31-1/2". (See Figure 6H below and
Figure 6J on Page 46.)
Figure 6G Offset Catwalk Support Clip Installation
Figure 6H