Grain Systems PNEG-1874 - Manual (Page 40)

40 PNEG-1874 18' Tower Dryer Fan Style Catwalk Assembly
6. 18' Offset and Roof Hatch Platform Installation Instructions
Installing Z-Clips (GT1-2036)
1. Bolt Z-clips (GT1-2036) to vertical channels (GT1-0001). The Z-clip can be installed on each vertical
channel as wall sheets are installed using 3/8"-16 x 1" YDP grade 8 or grade 8.2 bolts (S-7927)
and 3/8"-16 ZN grade 5 nuts (S-968).
(See Figure 6A, Figure 6B below, Figure 6C and Figure 6D on
Page 41.)
Figure 6A Offset Z-Clip Installation
Figure 6B Offset Z-Clip Installation