Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1783 - Manual (Page 12)

3. Installation
12 PNEG-1783 Jib Crane for Bucket Elevators
Attach Rollers and Roller Guard to Turret
Attach rollers and roller guard to the turret using the shoulder bolts and 5/8" nuts as shown. Slide the
pin tether cable through the holes in the roller guard and pin. Fasten in place with provided cable clamp.
Insert the 90° pin constraint through the turret and the constraint plate to lock turret in place as shown in
Figure 3D and Figure 3E .
Figure 3D Figure 3E
Rollers