Attach boom assembly to the turret, Attach adjustable tie rod to the boom and turret, Trolley – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1783 User Manual
Page 13
Advertising
3. Installation
PNEG-1783 Jib Crane for Bucket Elevators
13
Attach Boom Assembly to the Turret
Insert pivot pin through the turret and the boom assembly and fasten in place with the cotter pins as shown
in
Figure 3F
Attach Adjustable Tie Rod to the Boom and Turret
Install clevis pin through the tie rod arm and turret bracket. Place other clevis pin through the tie rod arm
and boom bracket. Fasten both clevis pins in place with a cotter pin on each side.
Trolley
Refer to manufacturers instructions supplied with trolley.
Advertising