Grain Systems Tanks PNEG-4075A - Manual (Page 79)

Chapter 7: Roof Assembly
A Roof rafter D Left purlin clip (CTR-0099)
B 10 in. temperature cable bracket (CTR-0013) E 1/2 x 1-3/4 in. flange bolt (S-10252)
C Right purlin clip (CTR-0100) F 1/2 in. flange nut (S-10253)
3. Install a quick link (C) to each cable bracket (B) to support the temperature cables.
IMPORTANT: Do not attach weights to the temperature cables; secure the bottom of cables to the
floor with light twine. No roof rafter shall support more than one cable.
Figure 7-9 Supplier quick link
A Purlin C Supplier quick link
B Temperature cable bracket (CTR-0013)
4. Locate the center collar temperature cable hole (D), and install a supplier quick link (C), allowing for
the installation of a temperature cable at this location.
Pneg-4075A 75 Ft Diameter 40-Series Bin 79