Grain Systems Bin Accessories PNEG-1742 - Manual (Page 12)

12 PNEG-1742 VTDL-48 - 8 x 9 Door Assembly
3. Suggested Tools
1. Forklift or a similar piece of equipment capable of lifting 1500 lbs. at heights above 10'.
2. Welder.
3. Plasma cutter, torch or a similar tool for cutting base plates.
4. Concrete drill for installing 3/4" epoxy type anchors (if anchors are used).
5. 1/2", 7/16" and 1-1/8" drill bits.
6. Sockets and wrenches including 9/16", 5/8", 15/16", 1" and 1-1/4" sizes.
7. Drift pins and/or pry bars.