Grain Systems PNEG-1853 - Manual (Page 15)

4. 12' Outside Catwalk Installation Instructions
PNEG-1853 12' Tower Dryer Fan Style Catwalk Assembly 15
Installing Plank (GT1-2033) to Inner Toe Board (GT1-2035)
1. Install planks around the dryer on inner toe board starting from ladder opening toe board (GT4-1465)
as shown by arrow in the Figure 4J .
2. Planks (GT1-2033) are installed to bottom two (2) holes of the inner toe board (GT1-2035) using
3/8"-16 x 1" YDP grade 8 or grade 8.2 bolts (S-7927) and 3/8"-16 ZN grade 5 nuts (S-968).
(See Figure 4J.)
Figure 4J
3. Inner toe board (GT1-2035) is arranged with many slots to install plank. Install planks to corresponding
slots as shown in Figure 4K .
Figure 4K 12' Inner Toe Board (GT1-2035)
NOTE: Make sure the planks are aligned to right slots as marked in Figure 4K .