Installing plank support (gt1-2086) – Grain Systems PNEG-1853 User Manual
Page 50
Advertising
6. 12' Offset and Roof Hatch Platform Installation Instructions
50
PNEG-1853 12' Tower Dryer Fan Style Catwalk Assembly
Installing Plank Support (GT1-2086)
1. Once the planks are installed, install the plank support (GT1-2086) at the catwalk closing end
using 5/16"-18 x 3/4" YPD grade 8 or grade 8.2 bolts (S-4303) and 5/16"-18 YDP grade 2 nuts
(S-3611).
Figure 6R Plank Support (GT1-2086) Installation for Offset and Roof Hatch Catwalks
Advertising