Grain Systems Bin Accessories PNEG-1850 User Manual
Instructions, High snow load roof with stir-ator instructions
Advertising
Date: 11-14-11
PNEG-1850
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-1850
Version: 1.0
Printed in the U.S.A.
Copyright © 2011 by GSI Group
www.gsiag.com
Page 1 of 3
CN-206048
High Snow Load Roof with
Stir-Ator Instructions
Figure 1
Drill three (3) 7/16" holes in sidewall to mount
Stir-Ator standoff bracket (CRP-7135). Do not
place bracket on stiffeners and space brackets
to avoid roof beam stiffener bracket.
Mount Stir-Ator standoff bracket for HSR (CRP-7135)
to the sidewall using 3/8" x 1" bin bolt (S-455) and
3/8" flange nut (S-9373). Center of the top hole of the
bracket should be 10" below the horizontal seam.
Advertising
Table of contents