High snow load roof with stir-ator instructions – Grain Systems Bin Accessories PNEG-1850 User Manual
Page 3
Advertising
PNEG-1850
Page 3 of 3
High Snow Load Roof with Stir-Ator Instructions
Figure 3
NOTE: For High Snow Roof instructions, please refer to PNEG-1801 (30'-48' diameter) or
PNEG-1844 (60' diameter).
NOTE: For Design III Stir-Ator instructions, please refer to PNEG-1156, PNEG-1158 and PNEG-1174.
Attach rice-track bracket (DMC20051) to
Stir-Ator standoff bracket (CRP-7135)
using two (2) 5/16" x 3/4" bolts (S-275) and
two (2) 5/16" flange nuts (S-3611).
Mount the Stir-Ator standoff bracket to the
rice-track bracket using only the outside
two (2) holes. No drilling required for this
attachment. Do not use inside set of holes.
Advertising