Grain Systems PNEG-1936 - Manual (Page 23)

Chapter 2: Top Platform Assembly
Assembly of platform end plank
Table 2-12 Assembly Sequence
Callout Part number Quantity
I STR-1174 1
A , C S-7927 , S-968 2 , 2
J , K S-4303 , S-3611 3 , 3
NOTE: I should be seated on top of H and bolted with
J and K. Make sure the bolts and nuts are ori-
ented properly.
Assembly of platform planks
Table 2-13 Assembly Sequence
Callout Part number Quantity
H STR-1173 2
A , C S-7927 , S-968 4 , 4
J , K S-4303 , S-3611 6 , 6
NOTE: Each H should be adjusted and seated on top
of the adjacent H. Make sure the bolts and
nuts are oriented properly.
Assembly of platform planks
Table 2-14 Assembly Sequence
Callout Part number Quantity
H STR-1173 2
A , C S-7927 , S-968 4 , 4
J , K S-4303 , S-3611 6 , 6
NOTE: Each H should be adjusted and seated on top
of the adjacent H. Make sure the bolts and
nuts are oriented properly.
PNEG-1936 Top Dryer 23