Grain Systems Tanks PNEG-4054A - Manual (Page 99)

Chapter 7: Roof Assembly
6. Repeat this procedure for the remaining three center collar channel clips (H).
Figure 7-18 Installing center collar channel clips
H Center collar channel clip (CTR-0403) J 7/16 in. flange nut (S-10251)
I 7/16 x 1-1/4 in. flange bolt (S-10250) K Row of three holes
7. Tighten all of the hardware to the recommended torque specifications, see Bolt Torque Specifica-
tions, page 28 .
Pneg-4054A 54 Ft Diameter 40-Series Bin 99