Grain Systems Bin Accessories PNEG-1753 - Manual (Page 8)

3. Installation in Newly Constructed Tanks
8 PNEG-1753 Fall Restraint Reinforcement Kit
105'-25K Roof Fall Restraint Reinforcement Installation Instructions
for CRP-6945 (Continued)
2. Install CRP-6939 inside of the tank and attached to the vertical row of stiffener bolts adjacent to the
roof beam stiffener nearest the manway. For a reference, See Figure 3B . Top stiffener bolts are to
be removed to install CRP-6939. Replace top stiffener bolts with two (2) 3/8" x 1-1/2" grade 8 bolts
with steel back neoprene washers (S-5060). Use spacer (S-7041) as shown when installing in an
outside stiffened tank.
3. Drill holes in the tension plate. For a reference, See Figure 3B . Use two (2) 3/8" x 1-1/2" grade 8
flange bolts (S-7928) and flange nuts (S-9373) to attach CRP-6939 to the tension plate at the drilled
holes. Use shims (CRP-6947) as necessary to fill the gap between the tension plate and CRP-6939.
Figure 3B