Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 - Manual (Page 10)

10 Pneg-1413 4-Leg Towers
4-LEG TOWER BOTTOM SECTION ASSEMBLY
STC00177
(Anchor Clips)
STC00185
(H-Braces)
STC00336
(Bottom
Columns)
STC00183
(Vertical X-Braces)
S-3728
(1/2" x 1-1/2"
HHCS Bolts)
S-3729
(1/2" Hex Nuts)
STC00181
(Column Splice Plates)
1. Attach (2) Tower Anchor Clips (STC00177) to
bottom holes in each Bottom Column
(STC00366) using 1/2" hardware provided
(S-3729 & S-3728). (See Fig. 1)
2. Attach Vertical X-Braces (STC00183) to the
bottom columns (STC00366) as shown in Fig. 1
using 1/2" hardware provided.
3. Attach the column splice plates (STC00181) to
the tops of the columns (STC00366), using (2)
1/2" x 1-1/2" HHCS bolts (S-3729) and nuts
(S-3728) for each plate. (See Fig. 1)
4. Repeat steps 1-3 for the opposite side, so you
have two identical sections.
SIDE 1 & SIDE 2 ASSEMBLY
FIG. 1