Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 User Manual
Page 20
20
Pneg-1413 4-Leg Towers
4-LEG TOWER TOP SECTION ASSEMBLY
STC00185
(H-Braces)
STC00183
(Vertical X-Braces)
S-3729
(1/2" Hex Nuts)
STC00226
(Internal X-
Braces)
S-7534
(1/2" x 1-1/4"
HHCS Bolts)
S-3729
(1/2" Hex
Nuts)
S-3728
(1/2" x 1-1/2"
HHCS Bolts)
STC00180
(Top Columns)
1.
Attach Vertical X-Braces (STC00183) to the Top
Columns (STC00180) as shown in Fig. 5 using
1/2" hardware provided.
2.
Attach the column splice plates (STC00181) to
the tops of the Top Columns (STC00180), using
(2) 1/2" x 1-1/2" HHCS bolts (S-3729) and nuts
(S-3728) for each plate. (See Fig. 5)
3.
Repeat steps 1-2 for the opposite side, so you
have two identical sections.
SIDE 1 & SIDE 2 ASSEMBLY
SIDE 3 & SIDE 4 ASSEMBLY
1.
Connect the first two sections together by
attaching the Vertical X-Braces (STC00183) and
H-Braces (STC00185) as shown in Fig. 5, using
the 1/2" hardware provided.
2.
Attach the Internal X-Braces (STC00226) to the
H-Braces (STC00185) as shown in Fig. 5, using
the 1/2" hardware provided (S-7534 & S-3729).
FIG. 5