Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1418 - Manual (Page 4)

4 Sales Information Package PNEG 1418
1. Select BESAW part number from catalog sheet or numbering system sheet.
2. Select the motor, if required, from the catalog sheet. (Motor/Sheave Selection Sheet.)
3. Select the motor sheave, if required, from the catalog sheet ­ may require special sheave if other than standard
motor is used. Caution, check bore diameter for use on non­standard motors. Also, sheave may require
bushing (See Motor/Sheave Selection Sheet.)
4. Select the transition piece if going on a GSI Bucket Elevator ­ The transition piece must match both the
BESAW size and the Bucket Elevator size. (See Transition Selection Sheet.)
BESAW NUMBERING SYSTEM
Selling Instructions
SA XX X XX XX X
Product Diameter Hopper Nominal Capacity Hopper
Line of Profile Length of Flight
Screw of BESAW Thickness
Tube
SA
SA
SA
Choice Choice Choice Choice Choice
08 = 8" Screw
A = Standard
12 = 144" lg 20 = 2000 BPH
S = Std Profile 10 = 115.875" 15 = 1500 BPH
B = 1/4" Thick
30 = 3000 BPH
25 = 2500 BPH
10 = 10" Screw
A = Standard
13 = 153" lg 50 = 5000 BPH
S = Std Profile 10 = 120" lg 40 = 4000 BPH
B = 1/4" Thick 14 = 160" lg 56 = 5600 BPH
13 = 148.125"
L = Low­Profile 10 = 115.125"
S = Std Profile 13 = 13' 3" 70 = 7000 BPH A = Standard
12 = 12" Screw
80 = 8000 BPH
L = Low­Profile 70 = 7000 BPH
B = 1/4" Thick
A = Standard
15 = 15' 3"
12 = 12' 8"
B = 1/4" Thick 14 = 14' 8" 80 = 8000 BPH