Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1922 User Manual
Installation instructions, Instructions
Advertising
Date: 03-18-13
PNEG-1922
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-1922
Printed in the U.S.A.
Copyright © 2013 by GSI Group
www.gsiag.com
Page 1 of 5
CN-304156
Reverse Head/Take-Up Bridge
Belt Conveyor Installation
Installation Instructions
1. Place template on bottom of head section on the take-up end. Align edges of template with the
bottom housing and fasten with vise-grips or clamps.
2. Using the template as a guide, drill six (6) 9/32" holes into the bottom of the housing.
Figure 1
Advertising
Table of contents