Safety alert decals, Chapter 2 safety alert decals, Caution – Grain Systems PNEG-119 User Manual
Page 7
PNEG-119 Inline Centrifugal Fan
7
2. Safety Alert Decals
The GSI Group recommends contacting the local power company and having a representative survey the
installation so the wiring is compatible with their system and adequate power is supplied to the unit.
All precautions should be taken when lifting and/or moving. Use at least two men when moving the
unit anywhere.
The safety pages that follow are to show you where you can find the safety decals. The photographs show
exactly where the decals should be.
If a decal is damaged or missing, contact:
GSI Decals
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
A free replacement will be sent to you.
Roof Damage Warning and Disclaimer
Excessive vacuum (or pressure) may
damage roof. Use positive aeration
system. Make sure all roof vents are
open and unobstructed. Start roof
fans when supply fans are started.
Do not operate when conditions exist
that may cause roof vent icing.
DC-969
CAUTION
GSI Group, Inc. 217-226-4421
The manufacturer does not warrant any roof damage caused by excessive vacuum or internal pressure from fans
or other air moving systems. Adequate ventilation and/or “makeup air” devices should be provided for all powered
air handling systems. The manufacturer does not recommend the use of downward flow systems (suction).
Severe roof damage can result from any blockage of air passages. Running fans during high humidity/cold
weather conditions can cause air exhaust or intake ports to freeze.